 |
|
IMPORTANT CHANGE FOR 16VS and 16VSX Reels
BEFORE and AFTER J100001 Design Changes
| BEFORE 1-16VS R.S. PLATE ASSEMBLY 35-16VSX CLICK TONGUE 36-16VS CLICK BUTTON 36A-16VS CLICK BUTTON NUT 36C-16VS-B CLICK BUTTON ASSEMBLY 36S-16VS CLICK BUTTON CAP |
AFTER 1N-16VS R.S. PLATE ASSEMBLY 35N-16VS CLICK TONGUE 36N-50 CLICK LEVER 36-700 CLICK LEVER NUT 36C-16VS CLICK ASSEMBLY KIT 36S-80ST CLICK LEVER CAP 95-70 CLICK TONGUE BUSHING 95A-20 SERRATE CLICK WASHER 95A-50 TAB CLICK WASHER |
Other minor changes
Key #172. Originally 172-30VS Shift Button (Plastic). Changed to 172N-30VS Shift Button (Metal)
Early Run Reels - Design Change As of REV. 11/18/05
The first series 16VSX reels did not have a spacing sleeve (9-16VS) or the specific ratchet (81-16VS).
The replacement ratchet (81-16VS) has a smaller center hole diameter to hold the spacing sleeve (9-16VS) and spool bearing (20-722) inside the core of the spool. The use of the new parts eliminate the use of the retaining ring (173-16VS).
If your 16VSX has the original arrangement, it is recommended to purchase the two parts: ratchet (81-16VS) and spacing sleeve (9-16VS) to complete the upgrade.
 |
Click image to view details (Pop-Up Window) |
Order parts online for this reel(s):
https://www.mysticparts.com/PennParts/International.aspx#InternationalVS
Order parts online for this reel(s):
https://www.mysticparts.com/PennParts/International.aspx#InternationalVSX
0 Comments